4 Steps To Fix Samsung Galaxy Watch That Wont Turn On

Samsung Galaxy Watch users who have used the device sometimes understand that no matter how top-notch the watch is, there are sometimes flaws that require technical assistance.

But you may not have the energy and time to go to a Samsung shop to fix your faulty watch when it gets issues, especially when it won’t turn on.

We are going to discuss the 4 steps you should take when your Samsung Galaxy won’t turn on for no reason. Sometimes, it may happen that you have fully charged your Samsung Galaxy watch, then when the time to use it comes, you are not able to turn it.

To fix this problem, below are 4 steps you should take; carefully following these steps will fix your Samsung Galaxy watch and help you prevent it from happening again.

Step 1: Check the power button and the battery level

The initial step towards troubleshooting a watch that refuses to turn on or off is to inspect the functionality of its power button. A malfunctioning power button, often due to being jammed or unclean, could be the root cause of the problem. To determine the status of the power button, you can consider the following steps

1. To determine if the power button on your watch is functioning properly, hold it down for 10 seconds and observe if the watch responds by turning on or off. Should the button fail to elicit a response, it may be necessary to either clean or repair the button.

2. If the power button is not jammed, yet your watch is still not switching on, it would be prudent to inspect the battery level. A completely drained battery renders the watch powerless. To fix this issue, charge your watch and then switch it on. To assess the battery level, you can use the following steps

• To charge your watch, place it on. Plug the charging dock into a power source to ensure it has enough Power. Once connected, a charging icon should appear on the watch screen. If the icon doesn’t show up, it may indicate that the watch isn’t charging correctly. In such cases, you can experiment with the positioning of the watch on the dock or try an alternate power source or cable.
• If the watch fails to turn on even while it’s being charged, it may be necessary to exercise patience and allow the battery to charge fully for a few hours. In some cases, the charging process may be extended if the battery has been severely drained. To ascertain if the watch will power on, press and hold the power button or both buttons on the watch while it’s charging.

Step 2: Check the charger and the outlet

Should the watch fail to charge or Power on, it is plausible that the issue is either with the charger or the outlet being utilized. To diagnose the matter, consider employing the subsequent troubleshooting techniques

1. Before charging your watch, it is important to thoroughly examine both the charger and cable for any signs of damage, such as cracks, bends, or cuts. Should you come across any such damage, it is highly recommended that you replace the faulty charger or cable with a brand-new one. To ensure optimal performance, it is best to It is recommended to utilize the charger and cable that were originally included in your watch or a compatible option from Samsung.

2. Before charging your watch, it is advisable to inspect the charging dock and ports for any presence of dust, dirt, or debris that could disrupt the charging process. Gently wiping the dock and ports with a soft cloth or cotton swab will help to clear any such particles. It is equally important to ensure that the watch is accurately aligned and securely fastened to the dock.

3. In order to troubleshoot charging issues, consider trying an alternate power source or power strip. The current outlet may not be functioning or may be operating with low voltage. Additionally, experimenting with a different device, such as a phone or tablet, can help diagnose the issue with both the outlet and charger.

Step 3: Restart or reset the watch

In the event that the watch remains unresponsive despite inspecting the power button, battery, charger, and outlet, it may be necessary to restart or reset the device. Performing this action can address any software-related concerns that are impeding the watch’s ability to turn on. To initiate a restart or reset, consider trying the following steps

1. To initiate a restart of the watch, simultaneously press and hold both buttons until the Samsung logo appears, thereby triggering a reboot of the device and the elimination of some temporary data. Importantly, it should be noted that the restarting process will not result in the loss of any personal data or customized settings on the watch.

2. In order to reset your watch, press and hold both buttons for at least 7 seconds until the Rebooting screen appears. Once there, select the Power off icon and confirm by tapping OK. This action will cause all data and settings to be deleted from the watch, necessitating a complete reconfiguration. Please only resort to resetting your watch as a last option, as it will result in the permanent loss of any personal data and settings.

Step 4: Contact Samsung support or visit a service center

If the steps above do not resolve the issue, the malfunction may lie with the hardware or software of the watch. In this case, seeking help from Samsung support or visiting a service center may be necessary. The contact information and locations of service centers can be easily accessed on the Samsung website. 

To assist in the resolution of the problem, it may be required to provide the model and serial numbers of the watch, which can be located on the watch or its packaging. Additionally, verifying the warranty status of the watch is recommended to determine whether the repair or replacement of the device is covered.

Conclusion

As you have read and understood these steps, I encourage you to be careful in order to prevent those problems from coming back. The last step should be your go-to step when every other step doesn’t work for you.